Best factory marine floating airbag for ship launching 1.Usage of Marine Airbags Ship Launching Marine Airbags, also known as roller bags or ship launching rubber balloon, are made of heavy-duty synthetic-tire-cord layers with inner and out rubber layers in long cylindrical balloon shape. Marine Airbags for Ship Launching and Dry Docking for barge can be used for n Brazil, Indonesia Shipyard especially for barges launching, pull to shore, vessels' haul out and ship landing work. 2.Comparison with other Launch Way Rollers Bag is a innovative ship launching technology, comparing with "end-on launching", "side ship launching", "float-out". This ship launching technology overcomes the restrictions of fixed launching track of side-launch. Ship launching airbags are accepted by more and more shipyards world wide due to its advantages of saving time, saving investment, flexible, safety. The biggest vessel launched by ship launching airbags up to 100,000 DWT. 3.Material and constructure of Marine Airbag Inflatable Marine Airbags are to be constructed of an out rubber layer, multilayer heavy-duty synthetic-tire-cord layers, and an inner rubber layer vulcanized firmly. Ship launching marine airbags are cylindrical balloon body, with two conical head and end mouth. Air tightness swivel and air inlet kits are screwed with end mouth. Refer below picture.  2. Rubber Pad at two ends( to strength the tightness)  3. End protective clip at two ends ( Q235 H.D.G or stainless steel )  4. Marine Airbags Body  5. Safety Air inflate at one end and Air Tightness Swivel at the other end ( Q235 H.D.G or stainless steel) 6. Three-direct-link at the inflate end( Q235 H.D.G. Or stainless Steel)  7. 3/4' ball valve (brass)  8. Hose connection at the inflate end (Q235 H.D.G or stainless steel)  9. High quality Pressure Gauge at the inflate end. 4.Classification of Roller Marine Air Bags Ship launching marine airbags are categorized by "ordinary airbags", "high-bearing capacity airbags", and "Super-high-bearing capacity airbags" according to the bearing capacity. 5.Specification&Capacity of regular size-6layers: FAQ Q1:What's the material of your products?  A:Our raw material is natural rubber, and rubber-dipped nylon cord fabric  Q2:Are you factory or trading company?  A:We are the company and factory,located in Jimo City,Qingdao,near to Qingdao port and Qingdao airport,which is convenient for transportation.  Q3:Can you do OEM?  A:Yes,we can do.As long as receive your request,we could produce accordingly.  Q5:How can I get samples from you?  A:We are honored to provide you samples for check quality.Customers just confirm freight collect and then we could send out the sample by FedEx,DHL,UPS,TNT and so on.  Q6:What's certificates can your company provide?  A:We can provide CCS,ABS,DNV,LR,BV certificates.  Q7:What about your warranty time?  A:Our warranty period is 18 months.During this time,any problems about products from our factory,we solemn promise to change and repair them for free;if problems from customers' improper operating,we could provide free guidance and repair materials.
Maximum
Load:1000-100,1000kg
This novel VT
type Electric Wire Rope Hoist is made with 13 patented technologies.
As contrasted
with conventional designs, the VT type electric wire rope hoist is a
revolutionary new generation product. It houses many brilliant brilliant
attributes, such as a superb performance, short headroom, accurate positioning,
great operating comfort, and maximum security and reliability, all encompassed
in a compact design. It is a multi-functioning machine that has revolutionized
the way the wire rope hoist is designed and manufactured.
With a
hoisting capacity ranging from 800kg to 250,000kg,the lift can take the load up
to a maximum height of 103.6m.Plenty of models, Configurations and
specifications exist for the hoist, from which customers are sure to find the
perfect match.
Advantages
Ÿ Short headroom allows large vertical
operating space for the wire rope hoist. Size-C hoist design leaves more
vertical space for lifting. Such attribute can be hardly found in any of its
contemporaries. The hoisting hook can reach much closer to the side walls.
Minimum side clearance effectively enlarges the work area.
Ÿ Dynadrive is designed for stable
running and fast positioning. It can minimize the load sway and improve
operating safety and comfort.
Ÿ Each component of our electric wire
rope hoist is rigorously inspected and tested by our qualified engineers to
ensure the safety and working efficiency the final product.
Ÿ A high load factor 60% can be achieved
of the motor, whose cooling performance is 30% higher than other similar
products. High performance safety brake has a use life exceeding 1 million
cycles. The brake can adjust itself according to the degree of wear. This
design requires limited maintenance.
Ÿ Large-diameter cable reel is designed
for extended use life and small fleet angle. During lifting, the rope only
deviates a little to the side of the drum, which ensures vertical lifting,
accurate positioning, and maximum operating convenience.
Ÿ Given customer needs for performance
and ease of operation. ergonomic features are added to the electrical wire rope
hoist to increase operating safety and comfort. Double-layer protective polypropylene
coating of the pendant control station enables an IP65 rating.
Plenty of
options exist, in order to accommodate various customer needs.
Ÿ Non standard rail width
Ÿ Special rail gauge
Ÿ Radio remote control
Ÿ Traveling limit switch
Ÿ Derailment catches on double girder
trolley
Ÿ Phase protection relays
Ÿ Hoist travel monitoring device
Ÿ Sound and light alarm
Ÿ Explosion proof and/or spark proof
hoist
Ÿ Load indication device
Ÿ Motors thermal protection
Ÿ Stainless steel hoist electrical
cubicle:IP55 or IP65
Ÿ Class H motors
Ÿ Secondary brake
Ÿ Variable speed lifting
Ÿ CSA electric control
For any other special requirements,
please contact us.
Clean Room Crane,Cleanroom Cranes, Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.comÂ
1. End cap/plug at the tightness end ( Q235 H.D.G or Stainless Steel )
Â
Â
Â
Diameter
Safty Working Pressure
Working Height
Capacity
KN/m
Ton/m
Layer-6
D0.8m
0.24MPa
0.5m
122.4
12.9
D1.0m
0.22Mpa
0.6m
131.95
13.46
D1.2m
0.18MPa
0.7m
141.37
14.43
D1.5m
0.14MPa
0.9m
131.95
13.46
D1.8m
0.12MPa
1.1m
131.95
13.46
D2.0m
0.10MPa
1.1m
155.51
15.87
D2.5m
0.10MPa
1.3m
162.34
16.41
Prior to delivery of the ship launching marine airbags, we test every air bag .All Evergreen Maritime ship launching marine airbags are manufactured and tested comply with  ISO 14409 "Ships and marine technology - ship launching air bags certificated by CCS, LR, DNV.Â
 Q4:What's your delivery time and payment terms?
 A:Delivery time is according to customers' size and order qty.The payment terms you could choose are T/T,L/C at sight,Western Union and so on.
For more information,please contact me directly:
Â
Ada zheng
Mob:+8617663929366
Â
Model NO.: YT-10
Effective Length: 6-23meter
Dia: 0.8-3m
Layer: 3-12 Layers
Delivery: on Time
Working Life: 10-12 Years
Warranty: 18 Months
Company Type: Manufacturer and Exporter
Model No: Yt-4,Yt-5,Yt-6....Yt-12.
Trademark: Evergreen Maritime
Transport Package: Nude Packing, Suitable for Transport by Sea or by
Specification: 1.5X18
Origin: Shandong, China
HS Code: 40169500