Big Tunnel X Ray Luggage Screening Machine

Model NO.: JH10080

Conveyor Speed: 0.22m/S

Conveyor Max Load: 200kg

Penetration: 34mm Steel

Monitor: 17 Inch LCD Screen Display

Trademark: Anhushen

Specification: CE and ISO

Origin: China

HS Code: 9022191090

Model NO.: JH10080

Conveyor Speed: 0.22m/S

Conveyor Max Load: 200kg

Penetration: 34mm Steel

Monitor: 17 Inch LCD Screen Display

Trademark: Anhushen

Specification: CE and ISO

Origin: China

HS Code: 9022191090

JH-10080 XÂ ray screening System

General Specification
Tunnel Size: 1000mm(W)*800mm(H)
Conveyor Speed: 0.22m/s
Conveyor Max Load...200kg
Dose per Inspection...< 1.6Î¼Gy/h
Resolution...< 0.0787mm Copper Wire
Spatial resolution...Level: Dia1.3mm, Vertical: Dia1.0mm
Penetrate resolution...Dia 0.511mm
Penetration...34mm Steel
Film Safety...Guarantee ISO1600 Film
X-ray Leakage...<0.1Î¼Gy/h (at aÂ distance of 5cm From external housing)

X-ray Generator
Generate direct: Bottom to up
Generate anger: 80 degree
Anode Voltage...100~160Kv
Anode power...0.4 to 1.2mA
Cooling /Â Duty Cycle...Oil Cooling /100%

Image System
X-ray Sensor...L-Shaped Photodiode Array (multi-energetic), 12bit Deep
Monitor...High Resolution Color, LCD Accord, 17 inch
Image Processing...Edge enhancement, image strengthening, image lightening, ,Â reducing darkening, image returning, image retrieval.Â
Image Grey Level...4096
Image Max Resolution...1024 *Â 1280 pixel
Image Processing...24bit for processing real time
Image storage...Storage 60000 pictures in real time
Zones &Â Zoom...1-9 Image regions, 2, 4, 8, 16 Times Enlarge, Whole screen continuous observation
Multi-energetic distinguish objects...Organic objects in orange, inorganic objects in blue, mixture in green
High-energy/low energe...Switch from high energy to low energy
Assist to detect drug and explosive powder

Installation Data
Operation temperature/Humidity...0Â°C-45Â°C/20%-95%(non-condensing)
Storage Temperature/Humidity...-20Â°C-60Â°C/20%-95%(non-condensing)
Operation Power...220VAC(Â±10%)50Â±3Hz
Power Consumption...1.0 KW (max)
Noise: <58dB

Motor End Cover

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Motor End Cover,Washing Motor End Cover,Aluminum Engine Cover,Washing Machine Motor Cover

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com