Business vehicles are prone to rust in rainy season

商务车

There have been frequent rains throughout the country and there have even been floods. In the rainy season, commercial vehicles are relatively wet due to empty driving. Many germs and unpleasant odors are breeding. Because the environment inside a commercial vehicle is relatively airtight, in a relatively humid environment, it is very easy to breed and vice versa, and some careless car owners forget to have spoilage in the car. The situation will change, thus contaminating the compartments of commercial vehicles and directly affecting the health of the occupants.

1. In addition to the case where the bodywork of a commercial vehicle is welded and the door is welded, it is prone to rust and corrosion in a relatively humid environment. In the interior of the door, there are latches and hinges, etc. where there are iron parts. , because it is covered by the commercial vehicle door trim, it will also appear rusty.

2. The chassis of a commercial vehicle is a long-term storm, and it does not expose the sun. There is also a lot of contact with water. Under the influence of the environment and the condition of the road surface, it will be relatively easy to create. Rusty situation. Because the sun has not been seen for a long time, the smaller holes in the chassis of the commercial vehicle will cause the body to be particularly peeled off and corroded due to the infiltration of water.

In addition, because the rainy season has been washed out by rain for a long time, it is inevitable that the headlights of commercial vehicles will appear to be flooded. This will affect the brightness of the headlights and the damage that has occurred, leading to the headlights When the direction of the radiation changed, it would be a lot of hidden dangers for the commercial vehicle driving the safety belt.

Under the baptism of a long rainy day, a commercial vehicle needs to be cleaned. Of course, you can also use the free way to disinfect, you can use a sun's ultraviolet rays to disinfect the vehicle in a sunny weather. Choose a completely 360-degree place with no dead ends, open all the doors and the trunk of the commercial vehicle, and let the moisture in the compartment be discharged. After the body has been exposed to the hot sun for some time, it will be in the car. The water vapor and moisture on the deposit are discharged. In addition, the cushions and carpets used for the cotton and linen products in the vehicle need to be cleaned and then sterilized after drying.


Gas Metal Arc Welding Wire Production Line

WELDING WIRE DRAWING AND CUTTER MACHINE LINE

1-ROD WIRE PRETREATMENT(PAY OFF+DESCALER MACHINE+SAND BELT MACHINE)

2-ROUGH WIRE DRAWING MCHINE LZ560

3-HIGH SPEED STRAIGHTENER AND CUTTER MACHINE

4-THE FINISHED WIRE Φ2.50X350 Φ3.25X350 Φ4.0X450mm.

WE CAN MAKE THE WELDING WIRE ACCORDING TO THE BUYERS REQUIREMENTS

5.THE FIRST YEAR SERVICE INCLUDE THE SPAREPART IS FREELY SERVICE(BUT NOT INCLUDE THE BUYERS DELIBERATELY BREAKS THE MACHINE OR PARTS),THE SECOND AND THIRD YEAR JUST PAY THE PARTS COST.THE SELLER MUST OFFER THE LIFE-SERVICE FOR THE MACHINE LINE.

6.THE SELLER MUST GUARANTEE TO PRODUCE THE GOOD QUALITY FINISHED WELDING WIRE.

THE SELLER MUST OFFER THE ELECTRICITY MAP,TOUCH SCREEN,AND MANUAL BOOKS,MAINTAIN BOOKS,AND OTHER TECHNICAL DETAILS WITH ENGLISH.TRAIN THE BUYERS WORKERS TO MASTER THE MACHINE

7.SEA WORTHY PACKING, BIG MACHINES WRAPPED WITH PLASTIC NYLON, SMALL MACHINES AND PRECISION MACHINE MUST PACKED IN PLYWOOD BOXES THEN FIXED IN THE CONTAINER

Gas Metal Arc Welding Wire Production Line,Welding Wire Production Equipment Line,Production Line For Wire Barrel Packaging,Welding Wire Copper Plating Machinery=Proper(B10)

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com