Certificated Ship Used Marine Pneumatic Rubber Fender Inflatable Fender

Certificated Ship Used Marine Pneumatic Rubber Fender Inflatable Fender

1. General introduction

ISO17357:2014 Floating pneumatic rubber fender is an anti-clossion device for marine application in the world. It is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the sea surface and work as a shock absorber when ship to ship transfer operation and ship to dock berthing and mooring operations.

Evergreen floating pneumatic rubber fenders fully company with all requirements on ISO17357:2002 Sstandard. Our products are certificated by CCS, DNV, GL, LR and BV.

 2.  Construction  features

The basic body construction of  Floating pneumatic rubber fender consists of outer rubber layers, synthetic-tire-cord layers and inner layers. Please take the picture for reference.

All of these layers are vulcanized together ,and then compress air  inside to enable the fender to float on the sea surface. 


 3.  Specification and Performance

Yokohama Pneumatic rubber fender are available from 500X1000mm to 3300X6500mm, including all the standard and no-standard specifications.

Details:

    

4.Pressure requirements of Yokohama type Pneumatic Rubber Fenders -

Evergreen-Maritime manufactures marine rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357:2002.
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally. 

 

Contact manufacturer directly for more details !

Marketing Manager:    Aimee Sun

  
Tel: 0086 17663929266

PREMIUM TRIMMING MARBLE BLADES (SMPT)

These segmented marble blades are available in sizes 12" to 36" for use on stone saws. Employing higher grade and smaller grit diamond from our own plant, these blades are designed for smooth cutting in production and quarrying operations. 10mm (.395") segment height.

PREMIUM MARBLE BLADES (SMPS)

These blades are specially engineered for marble cutting, providing chip free smooth edges. Available in sizes 4" to 14" for use on all hand tools and saws. 10mm(.395") segment height.