It is hard to believe that many of my friends have been baffled by the start-up of vehicles. At the same time, they will find it very bothersome. Mixers should have this kind of situation. What should we do? Let's find the symptoms first, and then apply the medicine. The factors that cause the concrete mixer to start difficult are probably summed up the following points, are still in troubled card friends, may wish to check and check 1. When starting the concrete mixer truck, if only the sound from the electromagnetic switch of the starter is heard, the crankshaft does not rotate, which may be caused by the battery “breakingâ€. It is recommended to check the battery. 2. The self-discharge of the concrete mixer battery is serious, and the aging of the plates and separators will also cause short-term parking to start, but it will be more difficult to start again after a long period of parking. It is recommended to consider replacing the battery. 3, starter found that the starter suddenly turning powerless, accompanied by a burning rubber smell or smoke at the battery, then it may be extremely poor pile and pole clamp contact, resulting in heat burned. 4. When the starter starts, the drive gear and the flywheel ring gear of the engine flywheel will make an impact sound, which may be caused by the deformation of the meshing cut-in surface of the flywheel ring gear of the concrete mixer wheel. 5. When the main power switch is turned on, the drive gear of the concrete mixer starter meshes with the flywheel ring gear. This may be because the starter solenoid switch's holding coil is wrongly connected to the power terminal or the key switch. The three lines on the wrong connection. 6. If there is only a slight "click" at start-up and there is no response afterwards, there may be a problem with starting the relay to issue a card.
CATSU excavator bucket is a large attachment used
on an excavator to scoop and move materials such as dirt, rocks, and debris.
CATSU excavator bucket typically made of heavy-duty steel and comes in various
sizes and shapes depending on the type of job it is used for. CATSU Excavator
buckets can be used for digging, grading, screen, trenching, and demolition
work. CATSU Excavator buckets commonly used in construction, mining, and
landscaping industries.
For grading tasks, the CATSU Tiltrotator paired
with a Grading Bucket ensures smooth and precise leveling of surfaces. The
ability to tilt and rotate the attachment allows for precise grading and
contouring, resulting in high-quality finished surfaces.
Excavator Bucket ,Doosan Grading Bucket,Komatsu Grading Bucket,Volvo Grading Bucket CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcatsu.com
The CATSU Tiltrotator is a highly versatile and efficient attachment that works
seamlessly with various excavator attachments. Whether you need to dig, grade,
cable, rip, rake, compact, or sweep, the CATSU Tiltrotator provides exceptional
performance.
When equipped with a Digging Bucket, the CATSU Tiltrotator allows for precise
and efficient excavation work. It enhances the excavator's capabilities by
enabling 360-degree rotation and tilt, providing greater flexibility and
accuracy in digging operations.
When using the Cable Bucket attachment, the CATSU Tiltrotator offers enhanced
control and maneuverability. It enables operators to easily handle and position
cables during construction or utility work, improving productivity and
efficiency.