Aluminum plate is the thickness of above 0.2mm to below 500mm, more than 200mm width, length within 16m aluminum material called aluminum plate or aluminum sheet, below 0.2mm for aluminum,200mm width within the bar or bar (of course, with the progress of large equipment, the widest can do 600mm aluminum plate is also more).
Aluminum plate refers to the rectangular plate made of aluminum ingot rolling, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate and pattern aluminum plate.
Aluminum plate is usually divided into the following two types:
1. According to the alloy composition:
High purity aluminum sheet (rolled from high purity aluminum with content above 99.9)
Pure aluminum plate (basically made of rolled pure aluminum)
Alloy aluminum plate (composed of aluminum and auxiliary alloys, usually aluminum Copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)
Composite aluminum plate or brazed plate (special purpose aluminum plate material obtained by means of composite of multiple materials)
Aluminum clad aluminum sheet (aluminum sheet coated with thin aluminum sheet for special purposes)
2. Divided by thickness :(unit mm)
aluminum sheet (aluminum sheet) 0.15-2.0
Conventional plate (aluminum sheet) 2.0-6.0
Medium plate (aluminum plate) 6.0-25.0
Thick plate (aluminum plate) 25-200 super thick plate more than 200
Drawing aluminum plate: The manufacturing process of repeatedly using sandpaper to scrape the aluminum plate out of the line, the main process is divided into three parts: deester, sand mill, washing. In the drawing process of aluminum plate, the special skin film technology after anode treatment can generate a skin film containing the metal composition on the surface of aluminum plate, and clearly show each fine wire trace, so that the fine hair luster in the metal matte.
Aluminum oxide plate: aluminum plate is placed in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, under specific conditions and external current, electrolytic aluminum plate formed. The anodic aluminum plate is oxidized to form a thin layer of alumina on the surface, the thickness of which is 5 ~ 20 microns, and the hard anodic oxide film can reach 60 ~ 200 microns.
PS aluminum plate (advertising aluminum plate, also known as printing zinc plate, newspaper plate) : that is, on the back of the printing pattern thickness of 025 or 03 materials of aluminum plate.
Mirror aluminum plate: refers to the aluminum plate treated by rolling, grinding and other methods, so that the surface of the plate presents the mirror effect.
Embossed aluminum plate can also be called aluminum embossed plate: on the basis of aluminum plate, after calendering and forming a variety of patterns on the surface of the aluminum products, widely used, mainly in packaging, construction, curtain wall and other aspects.
Aluminium plate,Aluminium sheet,Aluminum Alloy Plate,aluminium checkered plate Shandong Longhao Steel Group Co., Ltd. , https://www.longhaosteels.com
Now that the price of oil is rising at a rapid rate, there will be no downward trend at one and a half. How can we have both cars and money? ? Here are some fuel-saving tips that I hope will help everyone.
First, maintain a reasonable speed
Each type of car has its own economical speed. At this speed, it has the lowest fuel consumption.
Second, cold engine start should try to avoid prolonging the engine temperature rise time
The temperature rise time of the engine should not be artificially extended when the cold start is started, otherwise it is counterproductive.
Third, avoid unnecessary idling
Generally, the consumption of fuel for a car that is idle for more than one minute is more than that for restarting. Therefore, if the parking time is long, the engine can be turned off.
Fourth, avoid sudden acceleration and deceleration during driving
The drive should strive to maintain a steady speed and avoid sudden acceleration and deceleration.
Fifth, reduce the vehicle's own weight
The relationship between vehicle weight and fuel consumption is proportional to the ratio. It is said that for each 10% drop in vehicle weight, the fuel consumption will decrease by several percentage points.
Everyone strictly follows the above statement. Under normal circumstances, fuel economy is no problem.