Electric Aroma Oil Diffuser,Home Scent Diffuser,Air Scent Diffuser,Easy Home Aroma Diffuser Guangzhou Chiyang Scent Technology Co., Ltd. , https://www.gzdiffuserscent.com
The masonry fireplace has a nostalgic style in appearance, but the construction process is relatively complicated and the design is not very reasonable, so not many are generally used.
When installing a new fireplace, it is best to determine the best installation location based on the interior of the house. Suitable installation locations are the living room, bedroom and kitchen. The installation location generally has three forms: one is in the center of the partition wall; the other is in the female foot where the outer wall and the inner wall are orthogonal. The two types of back room must have another fireplace that is close to the partition wall. They share the same. The same flue; the third is set in a prominent place in the hall, and the upper and lower fireplaces are generally aligned. There are several small holes in the upper part of the fireplace's smoke column that open into the room. These small holes are set to exhaust the indoor exhaust gas using the fireplace flue.
For cast iron fireplaces, the installation requirements for each model are different. Carefully checking the location of the changes needed to determine the product model will do more with less. Under normal circumstances, the simplest installation is to install a fireplace without a flue. It only needs to connect the smoke pipe through the wall or floor to the machine. Whereas a fireplace chimney with a flue gas exhaust pipe can pass outside walls to exhaust the exhaust gas to the outside, the choice of the fireplace location must take into account that the chimney of the fireplace can be easily accessed outdoors.
Wood-burning fireplaces have special requirements for the installation location and require a direct chimney. The smoke tube extends out of the roof and has sufficient distance from the surrounding buildings, so discuss the feasibility with the dealer before final purchase and installation. The storage of fuel is also a consideration. The wood-burning fireplace is best placed in a place where wood is stored near the garage and attic.
Usually, the installation of the fireplace is determined according to the structure of the house itself. For modern fireplaces, there are generally two types. One is a steel structure fireplace, which is generally mass-produced by a factory, and the other is a masonry fireplace. Production. General steel fireplaces are common and easy to install. The installer simply discharges the fireplace directly to a reserved location in the room, and the fireplace will not burn nearby objects due to its overheated appearance. At the same time there are good after-sales products.