Foton Aoling TX-4JB1TDi engine trees from the new high-end light truck fuel-efficient new benchmark


From the just-concluded "2011 (3rd) Foton Aoling China Le Mans Light-card Endurance Championship Southeast Championship Regional Championship" was informed that: Foton Aoling TX-4JB1TDi power light truck 100 km weight-bearing fuel consumption is only 6.58 liters to lead The absolute advantage of the industry is to set a new benchmark for saving fuel in high-end light trucks.

As the first light truck race in China, the Foton Aoling China Le Mans Light Truck Endurance Competition was organized by the China Association of Automobile Sports (FASC) and co-organized by Foton Motor. It has been successfully held twice since 2008 and has the strongest in the industry. National participation. The third final of the 2011 Foton Ao Ling China Le Mans Light Car Endurance Championship and Champion Challenge Southeast Division was bold and innovative. The Foton Aoling TX-4JB1TDi powered light truck was used as a racing car to challenge the light truck fuel saving limit. The China Automobile Association requested that the cab be refitted safely. The power, chassis, etc. should be the same as those of the commercial vehicles sold on the market. The ordinary truck drivers should race within the prescribed mileage of city streets, and the team with the least fuel consumption wins.

In this regard, the organizers frankly, this competition with Foton Aoling TX-4JB1TDi power light truck as the only designated car, is a decision after repeated research. The facts show that, whether it is from the leading position of the powertrain system or the matching of the vehicle design, the Foton Aoling TX-4JB1TDi power light truck is enough to play the role of a new benchmark for light truck fuel-efficient fuel.

4JB1TDi Power Creates Energy Saving Advantage of Olympic Bell TX Light Truck

Fukuda 4JB1TDi power is based on the Isuzu 4JB1 engine, combined with Germany's Bosch, Austria's AVL and other advanced technologies from Europe to upgrade the electronically controlled high pressure common rail engine, has the advantages of energy saving, environmental protection, reliability, etc., is the crystallization of Foton's automotive chain innovation.

According to reports, the Aoling 4JB1TDi engine not only retains the superior performance of the Isuzu 4JB1 engine, such as strong power and low noise, but also has lower energy consumption and stronger power due to the combination of European and American top technologies. For example, the use of Bosch's electronically controlled high-pressure common rail system allows the Aoling 4JB1TDi engine to provide more accurate fuel injection time, requiring just 0.001 milliseconds of system response time to allow fuel to be injected at the right time, greatly improving fuel efficiency.

The self-correcting function of the ECU electronic control unit of the 4JB1TDi engine is a set of control data accumulated after a large number of tests on the engine and the vehicle, making the Aoling 4JB1TDi engine available for intake air pressure, intake air temperature, water temperature, The oil temperature, etc., is used for fuel injection correction to ensure the best use of fuel at any time, so that every drop of oil is used in practice. The integration of these leading technologies will enable this engine to be in the best working condition under all kinds of road conditions, and the fuel consumption rate will be reduced by more than 10% compared with similar products.

In addition, the Aoling 4JB1TDi engine is also matched with the world's top Honeywell turbocharger, ensuring sufficient air intake at low speeds, idling speeds of over 1.6 bar, and at the same time making it possible to mix air and fuel under any operating conditions. To achieve the best, so that the combustion more fully, so that the engine more energy efficient.

According to Aozing 4JB1TDi power manager, at full load, the power passed a continuous 500 hours of reliability testing, and -40 °C cold start experiment to ensure the reliability and applicability of 4JB1TDi power.

Ao Ling TX won the 2011 (third) Futian Ao Ling Chinese Le Mans Light Endurance Championship cum Championship Challenge with the 4JB1TDi's strong fuel-efficient heart. It challenged the Southeast Division's fuel-saving challenge to challenge the light truck. Fuel saving limit.

Practice is the only standard to test the truth, Austrian Bell TX-4JB1TDi power light truck challenge high-end light truck fuel-efficient limit

There is no bamboo swaying in the wind. It is based on this that the Olympic Bell TX-4JB1TDi power light truck has an energy-saving and reliable heart, and the matching of the whole vehicle is also unique. Ao Ling TX-4JB1TDi power light truck chassis optimized by the British Lotus technology, making the engine, transmission, transmission shaft, rear axle and other parts of the match more reasonable, effectively improve the transmission system transmission efficiency, making the vehicle's energy-saving advantages more obvious.

In addition, the actual width of the Austrian Bell TX-4JB1TDi driver's cab is 2050mm, which is 10cm wider than traditional light trucks. It is the widest product in the cab of similar products. The front row can easily ride 3 people, and the car interior design can be Said to be an economical fuel-efficient mid- to high-end light truck product tailored for users, with unmatched price/performance advantages, the Aoling TX-4JB1TDi power light truck is derived from Isuzu technology and higher than Isuzu, focusing on the market for high-speed and high-efficiency cities. Demand for logistics vehicles.

Aoling TX-4JB1TDi power light truck as the third car of the Foton Ao Ling China Le Mans Light Car Endurance Championship and Champion Challenge competition in 2011, through the game, to show consumers the real fuel consumption of the Aoling TX-4JB1TDi light truck directly. Product performance is comprehensively tested. After several hours of fierce competition, the Austrian Bell TX-4JB1TDi power light truck can live up to expectations. The fuel consumption per 100 kilometers is only 6.58 liters, and the high-end light truck fuel-efficient benchmark is established.

Foton Aoling TX-4JB1TDi power light truck not only has ultra-low fuel consumption, but it also brought a lot of surprises in terms of maneuverability, safety, etc., control has a driving car-like feeling. It is understood that the Austrian Bell TX-4JB1TDi power light truck is based on ergonomics forward design and development of the body assembly light truck type, with good no-load ride comfort and full load stability, so that the city logistics more efficient and more comfortable. Through the comprehensive examination of the Southeast Division finals, the overall quality won the praise of the contestants and was highly recognized by the event's main committee. The Austrian Bell TX-4JB1TDi powered light trucks are focused on fuel economy and create a new benchmark for urban logistics value.

AoLing brand always adheres to the core advantages of the practice of science and technology, taking efficiency, fuel-saving and environmental protection as the starting point to provide environmentally friendly and economical fuel-efficient products for China's medium-to-high end light truck market. Austrian Bell TX-4JB1TDi power light truck is the foundation of Foton Auto Olympics brand in the existing suburban logistics market. In order to continuously strengthen the important products launched in the city's logistics market, the Olling TX-4JB1TDi power light truck increased by more than 40% in the first half of 2011. . It is believed that through the inspection and training of the 2011 (3rd) Foton Aoling China Le Mans Light Card Endurance Championship Champion Challenge, the Aoling TX--4JB1TDi power light truck will be further favored by the market and users, and will be the brand of Foton Aoling. In the mid-to-high end light truck market, the upgrading of the light truck industry will be promoted.

Silicone Mold

Silicone mold is made of food grade silicone,it won't harmful our body.People can use it safely.It is resistant to high temperature and low temperatur.It have many usage such as can uesd for Silicone Cake Molds,chocolate molds,it can be called as Silicone baking molds,silicone,silicone sweet moulds.And also have another two,silicon mold soap,Silicone Ice Molds.

And it won't break easily,so don't worry about its quality,we will provide best quality for customers.

Cake Molds For Oven

Silicone Chocolate Bar MoldsCute Silicone Ice Cube Trays

Silicone Mold For Soap


Silicone Baking Molds,Chocolate Molds Silicone,Silicone Sweet Moulds,Silicon Mold Soap

Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconepettags.com