High Quality DC Submersible Solar Pump for Deep Well

Applications Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Operating conditions
For water supply from wells or reservoirs Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Maxiumum fluid temperature up to +40ÂºC.
For domestic use,for civil and industrial applications Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Maximum sand content : 0.25%
For garden and irrigation Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Maximum immersion :300mÂ
Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Minimum well diameter : 4"Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â

Motor and pump Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Options on request
Rewindable motorÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Special mechanical seal
Single-phaseÂ : 220V- 240V /50HZ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Other voltages or frequency 60 HZ
Three-phaseÂ : 380V - 415V /50HZ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Single phase motor with built-in capacitor
Equip with start control box or digital auto-control box
Pumps are designed by casing stressed
NEMAÂ dimension standardsÂ
Curve tolerance according to ISO 9906

Components	Material
Pump external casing	AISI 201 SS
Delivery casingÂ	AISI 201 SS
Suction lantern	AISI 201 SS
Diffuser	Plastic
Impeller	Plastic PC or ABS
Shaft	Stainless steel
Shaft coupling	Stainless steel
Wear ring	Rubber
Motor external casing	AISI 201 SS
Top chock	Cast-iron
Bottom support	Cast-Iron/Cast-Aluminium
Mechanical seal	Special seal for deep well(Graphite-Ceramic)
Shaft	Stainless steel
BearingÂ	C&N
Seal lubricant oil	Oil for food machinery and pharmaceutic use.

High Quality DC Submersible Solar Pump for Deep Well

High quality dc submersible solar pump for deep well

Â

Components	Material
Pump external casing	AISI 201 SS
Delivery casingÂ	AISI 201 SS
Suction lantern	AISI 201 SS
Diffuser	Plastic
Impeller	Plastic PC or ABS
Shaft	Stainless steel
Shaft coupling	Stainless steel
Wear ring	Rubber
Motor external casing	AISI 201 SS
Top chock	Cast-iron
Bottom support	Cast-Iron/Cast-Aluminium
Mechanical seal	Special seal for deep well(Graphite-Ceramic)
Shaft	Stainless steel
BearingÂ	C&N
Seal lubricant oil	Oil for food machinery and pharmaceutic use.

Gantry Flame CNC Cutting Machine

Advantages and features:
Automatic igniting and tempering control, high efficient and quick. Can be linear single, double - sided a molding groove cutting.
Brand: Buluoer intelligent
Other name: Gantry flame plasma CNC cutting machine
Cutting mode: flame cutting, Plasma cutting
Suit material: carbon steel, manganese plate, galvanized plate, stainless steel, copper steel, aluminium plate etc. metal plate materials.
Product describe:
This CNC equipment is aimed at metal plate materials baiting, not only the appearance of atmospheric but also stable operating, high working efficiency, long service life and it can be achieved cutting all kinds of design graphic. Widely used in various machine building industry of metal sheet cutting.
Product features:
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-deformation.
Can remote operation, convenient and efficiency, save labour.
Automatic temper control, safety and efficiency.
Full-automatic StarCAM/ FastCAM graphical editing software, simple nesting.
Flame/plasma dual-purpose cutting system, easy to operate and wide application range.
System has self-compensating, automatic positioning, automatic height-adjustment, break-point memory and automatic recovery function.
Cutting size customization, flame plasma sub-cutting options.

Product parameters

Type	BLDH-3060	BLDH-4080	BLDH-5080	BLDH-60100	BLDH-80100
Track gauge(mm)	3000	4035	5000	6000	8000
Effective cutting width(mm)	2300	3300	4300	5300	7300
Machine width(mm)	3500	4300	5500	6500	8500
Track length(mm)	6000	8000	8000	10000	10000
Number of standard cutting torch(set)	1	2	2	2	2
Input power	AC380V/50Hz;AC220V/50Hz
Lift(mm)	200
Cutting thickness(mm)	Flame cutting:5-150 Plasma cutting:1-30(According to the power supply size)
Cutting speed (mm/min)	Flame cutting:100-1000 Plasma cutting:450-5000
Idle speed	0-8000
Drive mode	Bilateral drive
System	Shanghai Jiaoda or Beijing Starfire
Operating accurancy	Â±0.5mm

According to the power supply size
LGK-120IGBT				LGK-200IGBT.
No.	Name	Specification parameter	Rrmark		Specification parameter	Rrmark
1	Track gauge	4.0m	Transverse efffective cutting max. 3 m		4.0m	Transverse efffective cutting max. 3 m
2	Track length	8.0m	longitudinal efffective cutting max. 6.5 m		8.0m	longitudinal efffective cutting max. 6.5 m
3	Max. idle speed	9000min			9000mm/min
4	Straight line position accuracy	Â±0.2min			Â±0.2mm
5	Straight line position repeat accuracy	Â±0.3mm			Â±0.3mm
6	Operating accurancy	Â±0.5mm			Â±0.5mm
7	Height controller lift distance	200mm			150mm
8	Flame punch cutting thickness	6-80mm	Carbon steel plate		6-80mm	Carbon steel plate
9	Flama max. Cutting thickness	200mm	Carbon steel plate		200mm	Carbon steel plate
10	Plasma punch cutting thickness	16mm	Stainless steel plate, carbon steel plate		25mm	Stainless steel plate, carbon steel plate
11	Plasma max. Cutting thickness (Edge cutting)	25mm	Stainless steel plate, carbon steel plate		40mm	Stainless steel plate, carbon steel plate
12	Inclination of plasma cutting surface	5-8Â° (carbon steel plate)			5-8Â°(carbon steel plate)
13	Roughness of plasma surface	Ra12.5			Ra12.5
14	Roughness of flame surface	Ra25			Ra25
15	Speed of plasma cutting	50-4000mm/min			50-4000mm/min
16	Speed of flame cutting	50-700mm/min			50-700mm/min
17	Drive mode	Bilateral drive			Bilateral drive (panasonic servo)
18	Number of cutting torch	CNC flame cutting torch: 1, plasma cutting torch: 1			CNC flame cutting torch: 1, plasma cutting torch: 1
19	Equipment accurancy	Conformed or superior to ISO8206-1991, JB/T10045.3-1999			Conformed or superior to ISO8206-1991, JB/T10045.3-1999

Flame plasma CNC cutting machine

Basic Equipment

No.	Name	Distribution	Unit	Quantity	Remark
1	Type specification	BLDH4080	set	1	Beam annealing
2	Drive mode	double-drive	set	2	Panasonic servo
3	Drive reducer	AEVELE	set	2	Taiwan
4	CNC	F2300TB	set	1	Shanghai Jiaoda
5	FASTCAM	Fast CAM Chinese version	set	1	Guoyou
6	Flame cutting torch	Wuxi Xiangzheng	set	1	Guoyou
7	Plasma power	Chengdu Huayuan LGK200	set	1	Huayuan
8	Arc voltage regulator	Shanghai Jiaoda	set	1	system-provided
9	Automatic ignite device	Wuxi Xiangzheng	set	1	Guoyou
10	Precision track	24 kg	m	8*2	Wuxi
11	Precision rack	Straight tooth	m	6*2	Wuxi
12	Pulley	Nylon chain	set	1
13	Lift body	2K2M	piece	2

Technical requriments

No.	Name	Distribution	Remark
1	Width of machine tool	4000
2	Effective cutting wideth	3100
3	Track gauge	3710
4	Idle speed	0~8000 mm
5	Flame cutting thickness	5~200 mm
6	Plasma punch cutting thickness	25mm	user demand
	Plasma max. Cutting thickness	45mm	user demand
7	Effective length	6500 mm
8	Cutting torch journey	â‰¤150 mm
9	Accurancy	Â± 0.5 mm
10	Track length	8m
11	Input power	AC220V/380V 50HZ
12	automatic height-adjustment	Jiaoda arc voltage height-adjustment
13	Cutting material	Stainless steel plate, carbon steel plate

Cutting samples

Flame Cutting Machine,Plasma Cutting Equipment,Copper Cnc Cutting Machine,Cnc Plasma Slab Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com