[ China Agricultural Machinery Industry News ] Not long ago, the agricultural machinery industry engaged in a forum in Xiong'an New District, the content is very real. Some insiders believe that the Xiong'an Forum has truly opened up the millennium of China's agricultural machinery industry transformation.
Of course, it is still very exaggerated to say how much the millennium is. But if we talk about the nature of transformation and upgrading, it is more practical.
At the forum, almost everyone agreed that the industry situation is extremely difficult and the transition is not easy, but hope and difficulties are at the same time.
Difficult situation, hope and difficulty
1 difficulty
It is true that the reference bacteria also feel that the agricultural machinery industry is very difficult.
For example, with the financing problem, with the large inflow of social funds into real estate and some high-return financial investment fields, private investment is weak and industrial development is slow.
At the same time, because of the de-capacity and de-leverage, the banks have adjusted their credit policies, making the agricultural machinery enterprises even worse.
The low profit is even more self-evident.
External causes are rising energy, labor, logistics, management and financial costs.
The internal cause is actually the low technical content of the product, the added value is too low, and the low-end capacity is excessive, which leads to a decrease in the profit of the agricultural machinery manufacturing enterprise.
Especially in the past two years, many companies have been difficult to sustain.
According to the data released by the relevant ministries, there is a huge income gap between the actual profits of China's agricultural machinery industry and industries such as real estate and finance.
Some funds began to move away from the manufacturing industry, and a well-received agricultural machinery industry has become a target for funds to stay away from.
According to estimates, the current average profit rate of the agricultural machinery industry is about 4%, while the operating profit of the banking industry is nearly 10 times that of the agricultural machinery industry.
If the “benefit†of agricultural machinery purchase subsidies is removed, many agricultural machinery enterprises have already had zero profits or negative profits.
2 change
However, at the Xiong'an Forum, many companies are also aware of the current technological advances in the agricultural machinery industry.
In particular, innovation awareness and enthusiasm have been significantly strengthened, new technologies and new models have emerged, and industrial progress and product upgrading have been gradually promoted.
An example of information application.
Not long ago, Chen Zhi, president of the China Agricultural Machinery Industry Association, told the reference bacteria that information technology and intelligent manufacturing were grafted into the agricultural machinery manufacturing process, which caused many products to undergo substantial changes.
At present, it is widely practiced in many fields such as Beidou navigation and infinitely variable speed, which not only improves the speed of technological progress, but also solves the problem of low-end overcapacity.
Taking China's Yituo as an example, its self-developed and manufactured LW4004 tractor is a continuously variable transmission tractor with completely independent intellectual property rights in China. Not only does the gearbox technology reach the world level, but its bus technology such as electric control and engine is basically synchronized with the world.
The same is China's one-to-one product. The unmanned tractor based on the Beidou system is closer to practical application. It has been recognized by several academicians including the Chinese Academy of Engineering. It is said that the project has already landed in Hubei to start the test terminal market.
Participating in the Xiong'an Forum is almost a company with a good background and good growth. Everyone is deeply admired for the role model of the French company.
As a result, agricultural machinery manufacturing companies like China's one-stop technology can stand up against the wind in the brutal industry competition.
3 future
This is like the image of Liu Zhenying, editor-in-chief of "Agricultural Machinery" magazine on the Xiong'an Forum. "When the industry is good, it is on the vent, so the pigs are flying. But when the industry is not good, the wind is small, the pigs are first dropped. Come down."
Liu Zhenying said: "The wind is a little bit smaller, and there is no wind after that. Those chickens and ducks and other wings are not hard and will fall."
"Only those eagle that can really fly can be flying high without the wind or even against the wind." Liu Zhenying said.
Liu Zhenying’s statement is very simple. In the past few years, the agricultural machinery industry has been on the cusp, and what kind of enterprises can come to share a piece of cake.
Now that the situation is not good, in the words of Wang Xinfang, chairman of Hebei Shenghe, "I will not do it, go on, and fill in the savings a few years ago." This is a reality.
When the industry is not good, it will be an unprofessional washout, and it will also wash out the unprofessional projects of professional enterprises.
This must be seen clearly.
Buttweld Tee
TEE Type welded/seamless X TYE ,Y TYPE
Standard: ASME/ANSI B16.9 ANSI/ASME B16.11 ANSI/ASME B16.28
BSEN10253-2 BS EN10253-4
Size:1/2''~48''(Seamless); 16''~80''(Welded)
Wall thickness: Sch5~Sch160\XXS
Manufacturing process: Hot Extruded , cold extruded ,pressed , etc.
Material:
Carbon steel:
FSGP PG370W PT370
.ASTM / ASME A234: WPB - WPC - WP1WP11 - WP12 - WP5 - WP22 - - WP91
ASTM / ASME A/SA 420: WPL6 - WPL3EN 10216-2: P195GH - P235GH - P265GH-P355Nh
20MnNb6 - 16Mo3 - 8MoB5-4 - 14MoV6310CrMo5-5 - 13CrMo4-5 - 10CrMo9-10-15NiCuMoNb5-6-4 - X11CrMo5X11CrMo9-1 - X10CrMoVNb9-1X10CrWMoVNb9-2 - X20CrMoV11-1former BS-DIN-AFNOR equivalent grades)
HIGH YIELD STEEL FOR PIPELINE AND OFFSHORE FITTINGS
ASTM A860 / MSS-SP75: WPHY 42WPHY 46 - WPHY 52 - WPHY 60-WPHY 65 - WPHY 70 grades
WPHY 80 only as per MSS-SP75 EN 10208-2: L245NB - L290NBL360NB - L415NB - L360QBL415QB - L450QB - L485QB - L555Q
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A234 WP5/WP9/WP11/WP12/WP22/WP91;
ASTM A860 WPHY42/WPHY52/WPHY60/WPHY65;
ASTM A420 WPL3/WPL6/WPL9;
Duplex steel
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow
passes through the run of the tee. The 90 outlet iscalled the branch of the tee. A straingt tee is manufactured with all three outlets, the run as well asthe branchm the same size. A reducing tee is madewith the branch outlet smaller than the run toaccoomodate the design flow rate.
Pipe Tee,Tee Pipe Fittings,Pipe Fitting Tee,Steel Pipe Tee
HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com
