Key points for replacing a windshield with six commercial vehicles

The front windshield now used is a laminated glass for both large and small vehicles. Even in the event of a traffic accident and strong external impact, the front windshield of the vehicle will only be cracked. It will hurt people after it is broken. The rear windshield in the commercial vehicle and the glass part of the side windows are all used tempered glass. Tempered glass, when subjected to a relatively strong external force, will cause a broken condition, but the formed granular It will be smaller, so it can reduce some of the damage to people.

The front windshield and rear windshield of the commercial vehicle are fixed to the body by professional glass glue. Due to different qualities and under the influence of the current season, the time to wait for the glass glue to completely dry is generally within one to three days. When the plastic glass of a commercial vehicle is not yet fully dried, it is necessary to take note of the following matters when it is necessary to drive.

1. After changing the windshield for a commercial vehicle , do not rush to clean the vehicle during the three days. After waiting three days, remove the tape fixed on the front windshield of the vehicle.

2. After the replacement of the new windshield, the road to be driven must be carefully selected. It is not possible to drive to a situation where the road conditions are relatively bumpy and bumpy. It is also necessary to avoid sudden acceleration and sudden braking. Avoid shifting to the windshield.

3. After replacing the windshield with a commercial vehicle, please do not go immediately to high speed. If it is still necessary to use high speed, you need to effectively control the speed within 80 kilometers per hour.

4, after a good replacement, do not paste the car film within a week, and driving the commercial car after the replacement of 3 days, should not open the window, to avoid the rear windshield due to a ride and a glass shift Bit situation.