To obtain perfect joins, inside of the solder ring copper fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,solder ring Copper Fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings Taizhou Runde Company , https://www.zjbrassfittings.com
According to Mitsui, a merchant ship, the company has tested insulation paints that save fuel, reduce carbon dioxide emissions, and reduce long-term maintenance costs. The Technical Research Center of the Mitsui Technical Department of Merchant Marine has just completed a year-long test of insulation paint produced by 10 thermal paint manufacturers.
Merchant Marine Mitsui conducted the highest paint test on the deck of a large ferry. Tests have confirmed that this paint can not only effectively reduce the temperature inside the ferry, but also saves the ship's electricity consumption by reducing the load on the air conditioning system on board.
Merchant Marine Mitsui pointed out that the insulating paint used for testing helps to block the heat generated by solar radiation. Therefore, this kind of heat-insulating paint can not only improve the comfort of passengers and crew on board, improve the efficiency of air-conditioning, reduce carbon dioxide emissions, but also reduce the maintenance cost of the ship due to its durability and climatic conditions.
The paint of the Merchant Marine Mitsui test has long been used on land-based buildings, large bridges, factories, oil storage tanks, various installations, warehouses, vehicles and railways, but will be used for large ships after this test.