Manual Saw Blade Pipe Cutting Machine 1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed. Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutting.com
Lighting technology has evolved from traditional incandescent lamps to energy-saving LED lights, and today's more advanced OLED lights are also in the forefront. AcuityBrands, the largest lighting company in North America, believes that the time has come to promote commercial and home OLED luminaires; the research firm Nanomarkets also estimates that the global OLED market will reach $1.4 billion by the end of 2020.
CNET reported on the 27th that OLED replaces the dot-like spot of LED with a sheet-like light source. The light is not dazzling and glare, and it does not need a hood to block. It can also be folded and bent for wider use. However, OLED lamps are currently overpriced and are the biggest resistance to the market. AcuityBrands believes that OLED lamp prices will drop significantly in the next few years.
Although the price is still high, AcuityBrands believes that there is still a way to promote OLED lighting technology. It will launch the wall-mounted wall lamp Nomi this week, made of 50x250 mm OLED panel, which will push the vertical lamp first, then push the vertical lamp. It is scheduled to be unveiled at the Casino International Lighting Exhibition in June.
OLED lighting panel plants include Konica Minolta, Philips, DuPont, LGChem, and others.
Nikkei News reported on February 12 that Pioneer will begin mass production of OLED lighting panels using a light-emitting layer coating type (forming a light-emitting layer by a coating process) using a production base in Yonezawa, Yamagata Prefecture, in March. The square panel with a side length of 10 cm has an initial monthly output of several thousand pieces. It is planned to expand the production to about 40,000 pieces in the second half of 2014 (October 2014-March 2015).
Pioneer has teamed up with Mitsubishi Chemical to set up an OLED lighting sales company, and plans to win 30 cities in the OLED lighting market in 2019, with a revenue challenge of 30 billion yen. According to the Nikkei, compared with LED lighting, the light emitted by OLED lighting is closer to natural light, but even with the above coating technology, the unit price is still 2-3 times that of LED lighting.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.