CNC Oscillating Knife Cutting Machine
Concepts:
INDUSTRIES:
Sign and Graphics, Digital
Printing, Packaging, Automotive, Recreational boat, Exhibits, and
Fixtures, Sign Making, Gasket Materials, Arts and Crafts, etc.
Main features:
Oscillating Knife Cutter With CCD Oscillating Knife Cutter With Ccd,Oscillating Knife Cutter,Cnc Router With Oscillating Knife,Oscillating Knife Atc Contour Cutter Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de
The general method of repair is to use the welding torch heating repair method, which is simple and convenient and practical, the effect is also possible. However, if the repaired area is used for a long time, insulation shrinkage will occur, underground cables will not achieve moisture-proof and waterproof effects, and the atrophic parts of overhead power cables will be more and more extended.
There is also a way to protect the cable insulation layer, which is a very effective method for the middle of the cable (the company sells it). The main structure of the product is to trap the entire cable damage and quickly heat the cable by heat treatment or cold treatment. Live, to achieve the same effect as the original cable. However, the material used to repair power cables is more expensive than ordinary repair methods, but the effect is very good. In particular, when the cable is laid, the cable should be repaired by damage.
The repair method of the power cable is probably the two kinds. Of course, there are temporary insulation tapes that can be used to maintain the site. However, it is only an emergency solution. In the original production process, the relevant national standards do not allow repair of the insulation without the written consent of the user. There are both advantages and disadvantages in the outer insulation repair of power cables. Of course, it is certainly not a good one.
CNC VISION SYSTEM: CCD Vision Cutting system contains two operating
modes: direct cutting mode and photo processing mode. Therefore, the
processing route manufacturing steps
Differentiate: Direct cutting does not need to draw a photo point, and
the tool path file for drawing a photo point can be processed through
the buttons on the interface.
Carpet, Felt, Foam, Closed
Cell Foam, Fiberglass Insulation, Composites, Gasket
Materials, Rubber, Fabric, Honeycomb Cardboard, Single-ply
Cloth/Fabric, Corrugated Cardboard/Paperboard, Vinyl
Veneers, Snowboard, Corrugated Plastic, Leather Goods, wood veneer for
inlay/marquetry artwork, Carbon fiber pre-preg laminates for aerospace,
military, and automotive components i.e.
Why choose Oscillating Knife Cutting Machine
The production volume of power cables is very considerable in China. Power cables are relatively cumbersome to produce. If the production time is too long, it is easy to cause failures, and it is necessary to insulate them. The country has relevant regulations on this issue.