1 oil spill: check shaft seal, the sealing parts, adjust or renewal. Hard sealing butterfly valve vacuum is not high: Our salesman are passionate and active. We are not only regard you as a customer but also friends. Most of them worked here for 5 years and very professional.We can understand you easily and help you understand more about us.We can give quotation in 24 hours so will not waste your time. wall calendar,,custom calendar,print calendar Shenzhen Longyin Printing Packing Co., Ltd. , https://www.longyinprint.com
2 Noise: abnormal noise: check whether foreign objects fall into the pump chamber, bearings, pump drive parts for damage. Clear, trim, change new.
3 fuel injection: a large number of oil spouts: check the oil level is too high, such as too high, release; retaining cover components, anti-injection components are intact.
4 Blind valve vibration: a lot of vibration: Check the base is solid, fastened, the foundation is sufficient. Have bite, stuck in the early signs, adjust.
5 pump temperature anomalies bearing fever: a little loose belt, check whether the smooth flow of oil, cooling water enough. Fuel tank heat, exhaust valve overheating: reduce the inlet pressure, increase the amount of cooling water.
6 bite stuck: check whether foreign objects fall into, parts intact, lubrication is adequate, fuel, oil, pumps.
7 electric shutter valve motor current is too large or fuse blown: check the current is too large reason, check the fuse capacity, adjust, change new.
(1). Pump leaks.
(2) cartridge hole suction, appear mist: cleaning oil filter, check tubing, pumps.
(3) pump oil pollution: open the gas valve running 1-2 hours or longer, or new oil.
(4). Insufficient fuel, the oil level is too low: fuel.
(5). Oil temperature is too high: Increase the amount of water, reduce the ambient temperature and inhaled gas temperature, eliminate occlusion, poor lubrication.
(6). Exhaust valve damage: for the valve.
(7). Exhaust valve spring damaged: renewal.
(8) parts of the pump wear and tear, there are different sound, power abnormalities: dismantling inspection of the rotating parts.
We are keen to slove any problem for you. :)