The back tanker is a car used to transport dry-mix mortar. It is mainly to transport mortar and other materials from the factory to the construction site. One of the biggest features of the back tanker is that it has a large storage tank for loading the transported material. The components of the back tanker mainly include the following. Car chassis, flip structure, frame, hydraulic system, electrical, and, most importantly, very large tanks. The components interact closely with each other to jointly realize the rapid transportation and decentralization of the materials. Since the components are all independent, the back tanker is also very convenient to repair in the event of a fault and is repaired symptomatically. The advantages of back tankers are numerous. First, the volume of the tank is large, and more materials can be stored. Secondly, in terms of easy operation, the cans can be flipped at least 90°, which is very convenient when loading and dropping materials, which greatly reduces the difficulty of the driver in reversing the operation of loading and unloading the material goods. In addition. A one-way blocking valve is set in the system, which can reduce the impact of the back tanker when it flips the tilting frame, and makes the backrest more stable and balanced. Moreover, the back tanker is highly safe and easy to maintain. The purpose of the back tanker is mainly to transport dry mortar and other materials, transport it from the production plant to the construction site, and after the site is up, only need to start operation, the back tanker can automatically unload the tank with the material. Place it on the ground. The material is released and all operations can be completed in just one person. Unlike the previous need to unload more than one person to load, not only to reduce the labor of operating workers, and only one person can complete the operation, greatly reducing the cost of staff employment and improve economic efficiency. At the same time, compared with manual operation, the speed of automatic operation is not a little bit faster, which greatly improves the efficiency of work. Having said so many advantages and characteristics of the tanker, the most important thing is its use, its nature determines the use, and the back tanker is very suitable for transporting and loading cargo. Larger and more loadable materials are also available. Fully automatic operation is super convenient and practical. Ability to transport clean and civilized goods. Not only saves time but also saves transportation costs. It is one of the dedicated transportation vehicles in the dry-mixed mortar transportation and storage operation system. Adhesive door frame edges need to be selected according to the material, generally you can use instant glue, slow-dry glue, nail-free glue, UV shadowless glue, swelling glue, etc.
UV shadowless glue belongs to two kinds of bonding. It is only effective if it is a transparent part. The bonding strength is also relatively good, and it dries quickly. After this glue is irradiated by ultraviolet rays, the reaction will be strong and the efficiency is very high. .
Door Frame Cover,High Strength Hot Glue,Hot Melt Pellets,Industrial Hot Glue GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.iwghotmelt.com
When repairing viscose, to avoid applying glue on a large area, you only need to divide the door frame into four equal parts, and point five points. The two ends and the middle must be glued, and then installed Go back and hold it for a few minutes, and after letting go, the door frame edge will not fall off.
Different glues have different effects, and you should choose and use them according to the material and specific conditions of the door frame edge.
The most convenient way is to use instant glue. After the glue is applied, it can stick together immediately, and the effect is relatively good. The effect is very good for metal and plastic parts. But this kind of glue is easier to paint, and it is easy to have white edges around it after a long time.
The filling effect of slow-drying glue is good, and it will not cause white fog, and at the same time, it will not appear embrittlement. The longer it is used, the better the adhesion will be, but the drying will be slower.
In the case of sticking wooden doors, you can use nail-free glue. Before using, clean the surface to ensure that the surface is free of oil and dust, and then use a sealing gun to squeeze out the glue.
