Causes and treatment of leakage of solenoid valve

 Problem: When the solenoid valve is actuated until the valve is opened, the silencer of the solenoid valve continues to blow. Cause: 1. See if the actuator and solenoid valve are tightly connected. 2. Remove the solenoid reversing valve and check if the seal is damaged or Missing, or leakage between the coil and the valve body 

3. There is moisture inside the compressed air, which may cause the solenoid valve to suffocate.

answer:

1. Prerequisites If the sealing ring of the old solenoid valve is intact or not missing, use a new solenoid valve to connect with the cylinder. If the solenoid valve does not leak, it indicates that the solenoid valve is leaking and the solenoid valve is leaking. Need to change a new solenoid valve

2. If there is a leak in the new solenoid valve, it is a gas leak, need to replace the cylinder, or open the cylinder for maintenance and replacement of the seal, etc.