General wreckers common problems and troubleshooting Grain Hatch,High-Quality Hatch,High Quality Ready To Ship,Aluminium Flush Hatch TAIXING HAITAI GLOBAL TRADE CO.,LTD , https://www.jshaitship.com
1. The lifting speed of the wrecker lifting arm is slow and inefficient
Reasons: 1 hydraulic power system failure   2 telescopic mechanism control valve, overflow valve failure
Method of exclusion: 1 inspection, adjustment   2 Disassemble, clean, adjust or replace damaged components
2 , Wrecker boom extension stretching vibration
Cause: 1 boom slider problem   2 telescopic cylinder is abnormal
Remedy: 1 Insufficient lubrication between the sliding surface of the lifting arm box and the slider should be applied grease; slider surface deformation is too large, should replace the slider; lifting arm surface damage, the surface should be repaired 2 check processing.
3 , the length of the boom lifting section of the wrecker cannot be compensated
the reason: 1 solenoid valve failure 2 circuit failure
Remedy: 1 Clean the oil filter, replace the electromagnet 2Check the external line fault
4 , wrecker lift arm automatic retraction
Reasons: 1 telescopic cylinder failure   2 balance valve failure
Remedy: 1 Check, adjust telescopic cylinder, replace damaged components   2 check, adjust the balance valve, replace the damaged components
5 , wrecker lifting mechanism does not move or slow
Reason: 1 vehicle control valve failure 2 hydraulic motor failure 3 balance valve failure 4 lift brake failure
Remedy: 1 Check processing 2 adjust the replacement spring
6. The movement of the wrecker lifting agency is interrupted
Reasons: 1 Check valve failure
Remedy: 1 cleaning, replacement
7. Loss of load control when wrecker is dropped
Causes: 1 Balance valve failure
Remedy: 1 Open cleaning
8 , Wrecker lifting mechanism can not open the brake
Reason: 1 shuttle valve stuck 2 Shuttle valve leaks 3 Bad brake piston seal
Remedy: 1 Repair shuttle valve 2 service shuttle valve 3 Service brakes, replacement seals
9 , rise from the limit, ring the bell does not ring
The reason: â‘ bell damage 2 over coil relay damage
Remedy: 1 Maintenance
10 , wrecker truck cylinder automatic retraction
Reason: 1 cylinder itself failure 2 balance valve failure
Remedy: 1 Check processing 2 open cleaning, replacement of damaged components
11th , wrecker brake cylinder vibration
Reasons: 1 There is air in the cylinder   2 Misalignment of the balance valve or damage to the spool, blockage of the orifice
Remedy: 1 Multiple amplitude action when no load, charge exhaust 2 open, cleaning inspection, replacement of damaged components
12 , Wrecker Lifting Failure
Reasons: 1 bidirectional hydraulic lock failure
Remedy: 1 Check and repair two-way hydraulic lock
13 〠Automatically retract the legs when lifting
Reasons: 1 Unidirectional in a bidirectional hydraulic lock 2 poor valve sealing 3 cylinder internal leakage
Remedy: 1 Check the two-way hydraulic lock check valve 2 inspection cylinder seal on the piston component
14. No movement or slow movement during lifting
Reasons: 1 The hydraulic pump is damaged 2 overflow valve failure 3 rotary joint damage 4 Manual control valve is damaged
Remedy: check repair
15. Oil temperature rises
Causes: 1 Damaged or malfunctioning hydraulic pump 2 Hydraulic oil contamination or insufficient oil
Remedy: 1 Replace or repair     2 should replace or add hydraulic oil
16 , Wrecker hydraulic pump does not rotate Grain Hatch