How to extend the life of a constant temperature and humidity test chamber

The compressor of the constant temperature and humidity test chamber is the core part of the equipment. How can we extend the service life of the constant temperature and humidity test chamber ingeniously? The environmental testing equipment industry expert Dongguan Yuanyao Technical Department has summed up the following points for you:

First, plant requirements

1. There must be more than 60cm space around the equipment;

2. The device is not directly exposed to direct sunlight or other heat sources;

3. There is no high concentration of dust and corrosive substances around the equipment;

4. There is no strong electromagnetic field around the equipment;

5. No flammable, explosive, corrosive substances and dust around the equipment;

6, no strong vibration around the device;

7, atmospheric pressure: a standard atmospheric pressure (standard atmospheric pressure is 101.325kPa).

Second, the environmental requirements

1, the ambient temperature: 5 °C ~ +30 °C (average temperature within 24 hours ≤ 30 °C)

2, the environmental humidity: ≤ 85% RH

Third, the load conditions

1. Prohibition of testing flammable and explosive materials;

2. Prohibit testing with severely corrosive and polluting articles.

Fourth, pay attention to matters

1. Please confirm the connection of the power supply before running the constant temperature and humidity test box;

2. Please note that this machine must be safely grounded to avoid static induction;

3. Avoid turning off and restarting the refrigeration unit within fifteen minutes;

4, water conditions: the use of pure water, distilled water, deionized water. Resistivity ≥ 500Ω.m

5, lights except when necessary to open, the rest of the time should be closed;

6, in the operation, unless it is absolutely necessary, please do not open the door;

7. After each test is completed, the power source, gas source, and water source should be cut off to prevent the device from being in a live standby state for a long time.

Brass Press Fittings

brass Press Fittings according to vigea and connex quality,approved kitemark and DVGW,Brass Press Fittings,brass press fittings,press Brass Fittings,pipe press fittings, V type brass press fittings,M type brass press fittings,M type brass press fittings Brass M type adapter press fitting Lead Free Brass Press Fittings 1/2"-2"

Brass Press Fittings,brass press fittings,press brass fittings,pipe press fittings, V type brass press fittings,M type brass press fittings

Taizhou Runde Company , https://www.zjbronzefittings.com