Light incubator parameter setting example

Light incubator parameter setting example

The light incubator is a high-precision thermostat with biochemical functions. Usually used with plant germination, nursery, tissue culture, microbial culture, insects, small animal rearing, BOD assay for water analysis, and more. It is an ideal test equipment for biological and genetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry, and aquatic products production and scientific research departments. The light incubator has precise control of temperature, light intensity, set up running time and other functions, and fully automatic control by the microcomputer, according to the screen prompts to set parameters, truly intelligent, so it is also called intelligent light incubator.

Here we give an example to understand how to set the light incubator related parameters. For example: the equipment operating cycle is 5 cycles, each cycle is three time periods, the first time period is the daytime, 8 hours, 6 light levels, the temperature control is 25°C; the second period is 16 hours, is the night , 0 illuminance, temperature control at 4 °C.

Light incubator specific parameter settings: long press the cycle key to enter the cycle setting, this time by increasing the key "∧" or reduce the key "∨", set the cycle to 5, then long press this key to exit; long press set / query Press the key for 2 seconds to enter the number of segments to select the setting state, and the setting lamp is on. The cycle window displays: "cH" and the hour window flashes. Similarly, the number of segments can be set to "2" by increasing the key "∧" or decreasing the key "∨". Continue to click this setting query key to enter the parameter settings for each time period. The period window displays the first segment "01" and sets it to 8, which is also modified by increasing the key "∧" or decreasing the key "∨". Then set the query key several times, minute window flashes, set to 0 minutes, then click the set query button, the temperature window flashes, then set the temperature to 25 °C, and then click the set query button, set the illumination, will The first segment of illumination is set to level 6. The first stage of parameter setting is completed. Then continue to click on the Set Query button to enter the second phase of the parameter settings, as with the above steps, the final parameter is set to 16 hours at night, light is 0, the temperature control is 4 °C. After the setting is completed, press the query key to return to the first paragraph of the parameter settings, long press the set query button to exit the setting. At this point, the parameter setting is completed.

The controller enters the running state, the running indicator light is on, and the controller runs according to the parameters set by the user. The runtime cycle indicator window displays the cumulative running period. The time is counted down, the time indicator window is displayed, the minute indicator window is displayed in minutes, and the seconds are flashed. The temperature indicator window displays the current measured value PV and the light window displays the current output light level. When the first period of time runs out, the program automatically switches to the second stage of operation. When the second period of time runs out, the operation cycle is incremented by one and looped in order. When the operation cycle reaches the set cycle, the program will automatically end, the temperature window displays “End”, the buzzer sounds 30S, the operation indicator light goes off, and all outputs are turned off. At this point, you can press the return key 4S for a long time to restart, or press the power button to turn the controller off.