S&A CW-6000 dual temperature water chiller can be used to cool 500W IPG fiber laser cutting machine

Mr. Li from a manufacturing company also has such a complex. Currently Mr. Li is using S&A CW-6000 water chiller with cooling function only to cool their 500W IPG fiber laser cutting machine. However due to the long-time operation, the cooling effect of the water chiller somewhat becomes weakened. Satisfied with the advantages of the S&A dual temperature water chiller used in cooling fiber laser, Mr. Li places another order with us for S&A CW-6000 dual temperature water chiller.
Then do you also wish to have an understanding of the advantages of S&A dual temperature water chiller when it`s used for cooling fiber laser? Please allow to explain the reasons.
Purposely designed for fiber laser, S&A dual temperature water chiller has two independent temperature control systems to separate high temperature from low temperature. The low temperature serves to cool the main body of laser, while the normal temperature serves to cool the QBH connector (the lens) to efficiently avoid the formation of condensate water. Also it`s equipped with a triple filter unit, where two wire-wound filters are separately used to filter the impurities in the cooling water circuits at the high temperature end and the low temperature end to guarantee the cleanness of water, while the third deionization filter mainly serves to filter out the ions in the water circuits to better protect the fiber laser.
The technical parameter of CW-6000: http://Products/ChillerCW60003000Wco.html